Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 395)

September 7, 2007 K2 Storage System Instruction Manual 395
Setting up the Level 20 GigE switch
field, as in the following example.
http://192.168.100.61
This should be the name or IP address as currently configured on the switch.
3. Press Enter to open the switch’s configuration application.
NOTE: The configuration application for the HP ProCurve switch requires Java.
You can also access the switch’s configuration application from the K2 System
Configuration application.
4. In the switch’s configuration application, choose Configuration , then Device
Features .
5. Set Spanning Tree to On and click Apply Changes . If prompted, log in with the
switch’s administrator username and password.
6. Click Port Configuration .