Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 284)

284 K2 Storage System Instruction Manual September 7, 2007
Chapter 6 Installing the Nearline Storage System
3. If you got a “The V: will not be available until this device is rebooted…” message
on the File System Server Configuration page, after the K2 Media Server restarts,
do the following:
a. In the K2 System Configuration application tree view, under the K2 Media
Server select the File System Server node.
The File System Server Configuration page appears.
b. Click Check and verify that the V: drive is shared. This is required for NAS
server functionality.
4. Repeat this procedure for remaining Nearline K2 Media Servers, if any.
Your configurations for the nearline K2 Storage System are complete.
Basic operations for nearline storage
Use the following procedures as you work on your Nearline storage system:
• “Nearline system power-off procedure”
• “Nearline system power-on procedure”
• “Using FTP for file transfer”
FTP Server Configuration
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard Click Finish . The wizard closes. The K2 Media Server restarts. Do not
proceed until restart processes are finished.
On this page… Do this…