Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 139)

September 7, 2007 K2 Storage System Instruction Manual 139
Setting up the Level 3 GigE switch
c. For the trunked ports, set Port Enabled to Yes . On some switch models, some
ports are disabled by default, so make sure you enable them. Leave Mode as
default of
Auto .
d. Set Flow Control as follows:
- For the 3400cl series switch, set to Disable .
- For the 2900 series switch, set to Enable .
If you have both 3400cl series and 2900 series on your network, having different
Flow Control settings (disable for 3400cl, enable for 2900) does not cause
problems.
e. Click Apply Settings .
8. On the Port Configuration page, do one of the following:
• If you do not have trunks, select all ports.
• If you have trunks, select the remaining ports (the ports not trunked).
This setting
varies depending
on switch model.
Set as instructed
in text.