Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 453)

September 7, 2007 K2 Storage System Instruction Manual 453
K2 configuration and NetCentral
information for some of the SNMP trap messages that must be sent to NetCentral.
• Control Point PC monitored by NetCentral — The K2 configuration Control Point
PC should be added to the NetCentral system and fully monitored by NetCentral.
This means that its SNMP trap destination is set to send SNMP traps to the
NetCentral server PC. Whether the Control Point PC and the NetCentral server PC
are the same PC or are different PCs, you should still add the Control Point PC to
NetCentral.
Refer to the NetCentral User Guide to set up the NetCentral system. After installing
a device provider, you can find additional documentation about monitoring that type
of device on the NetCentral Help menu.