Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 736)

736 K2 Storage System Instruction Manual September 7, 2007
Chapter 18 Administering and maintaining the K2 Storage System
14.In the Restore database Options view, select Force restore over existing database .
15.Click OK . The restore process runs.
16.When the restore process is complete, you can place the K2 Media Server into
service and bring the K2 Storage System online. If you have a redundant K2
Storage System, you must place the K2 Media Servers into service in the proper
sequence (first primary, then backup) to ensure that the database is replicated
correctly. Refer to
“Placing a K2 Media Server in service” on page 703 .
Restore SQL Server 2005 database
If the K2 Media Server has SQL Server 2005, use the following procedure to restore
the media database.
Before restoring the database, take the K2 Storage System offline and take the media
file system/database server or servers out of service. Refer to
“Taking a K2 Media
Server out of service” on page 701 . There must be no connections to the media
database and Failover Monitor must be off.
If you have a redundant K2 Storage System, restore the database to the K2 Media
Server that is the primary media file system/database server.
1. From the K2 Media Server Windows desktop, open Start | All Programs | Microsoft
SQL Server 2005 | SQL Server Management Studio . When prompted, click Connect
to connect to the server. Management Studio opens.