Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 225)

September 7, 2007 K2 Storage System Instruction Manual 225
Configuring server 2A
The File System Server Configuration page appears.
b. Click Check and verify that the V: drive is shared. This is required for NAS
server functionality.
Configuring server 2A
For Level 3 redundant, after you have configured the first K2 Media Server (server
1A) and its redundant partner server (server 1B) you next configure the other “A” K2
Media Server (server 2A).
1. In the K2 System Configuration application tree view, select the K2 Media Server
you are configuring as server 2A.
2. Click the Configure button. The Configure K2 Server wizard opens. Follow the
on-screen text to configure the server for a Level 3R K2 Storage System, as
described in the following table. Some screens require no input from you, as they
are based on the configurations already completed on a previously configured K2
Media Server.
On this page… Do this…
Define server roles
Enter the name for the K2 Media Server. This should be the current
network name of the machine.
For Level 3 redundant, select iSCSI bridge, FTP server, and NAS server.
Click
Next