Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 315)

September 7, 2007 K2 Storage System Instruction Manual 315
Configuring the server - Part 1
described in the following table:
On this page… Do this…
Define server roles
Enter the name or IP address for the K2 Media Server, as currently
configured on the machine.
For Level 10, select all roles.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on the
Level 10 K2 Media Server is
as follows:
• SQL Server
• K2 Server
• File System Server
• File System Client
• SNMP Services
• QuickTime
If software with Yes in the Required column reports as Not Installed, you
must first install it on the before continuing. Refer to
Chapter 16,
Managing K2 software. After installing the software, click Check
Software . When all required software reports as Installed, click Next .