Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 User Manual
Page 640
640
K2 Storage System Instruction Manual
September 7, 2007
Chapter 13 Installing the Nearline 10 Storage System
media file system into the wizard when you configure the first NH K2 Media Server,
as in the previous procedure. That server is now the acting media file system server.
You can now configure the remaining server using the following procedure.
NOTE: Multiple NH servers on a K2 Storage System must be of the same type,
either all NH1 or all NH1-10GE.
1. In the K2 System Configuration application tree view, select the K2 Media Server
you are configuring.
2. Click the
Configure
button. The Configure K2 Server wizard opens. Follow the
on-screen text to configure the server for a nearline 10 K2 Storage System, as
described in the following table. Some screens require no input from you, as they
are based on the configurations already completed on a previously configured K2
Media Server.
On this page…
Do this…
Define server roles
Enter the name or IP address for theK2 Media Server, as currently
configured on the machine.
For Nearline server roles, selections are disabled. Leave
SNFS file
system server
,
FTP server
, and
NAS server
selected.