Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 230)

230 K2 Storage System Instruction Manual September 7, 2007
Chapter 5 Installing the Level 3R Storage System
Network Configuration
This page displays the
control network Ethernet
port, and allows you to
configure the FTP/
Streaming network Ethernet
port.
NOTE: This page
does not configure
the iSCSI interface
(media network)
ports.
The top port is the port over which the K2 System Configuration
application is communicating with the K2 Media Server. If correctly
configured, it is already assigned the control network IP address, as
displayed on this page.
Select the other port and click
Modify . A network configuration dialog
box opens. Enter the FTP/Streaming IP address and the subnet mask and
click
Apply .
Click Next .
File System Client
Configuration
This K2 Media Server does
not function as a file system
server. It does function as a
file system client, which is
validated from this page.
Click Check . When the wizard reports that the configuration check is
successful, click Next .
If you get a “The V: will not be available until this device is rebooted…”
message, you can safely continue with this procedure and follow the
instructions related to this message later in the procedure.
On this page… Do this…