Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 629)

September 7, 2007 K2 Storage System Instruction Manual 629
Configuring the NH server - Part 1
Your K2 Storage System appears in the tree view of the K2 System Configuration
application.
5. Continue with the next procedure.
Configuring the NH server - Part 1
1. In the K2 System Configuration application tree view, select [ K2Server1] .
For a NL10 system, this is the one NH server. For a NL10R system, this is NH
server A
2. Click the Configure button. The Configure K2 Server wizard opens.
Follow the on-screen text to configure the NH server for a Nearline 10 K2 Storage
Page 3
Review the information on this page and verify that you have correctly
defined your K2 Storage System.
For a Nearline 10 storage system you should have the following:
• One K2 Media Server
• One Ethernet switch
For a Nearline 10R storage system you should have the following:
• Two K2 Media Servers
• Two Ethernet switches
Click Finish . The Define New K2 Storage System wizard closes.
On this page… Do this…