Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 222)

222 K2 Storage System Instruction Manual September 7, 2007
Chapter 5 Installing the Level 3R Storage System
On this page… Do this…
Define server roles
Enter the name for the K2 Media Server. This should be the current
network name of the machine.
Enter the name or IP address of the Ethernet switch, as currently
configured on the switch, to which the K2 Media Server is connected.
For Level 3 redundant, select
SNFS file system server , iSCSI bridge ,
and Media database server .
Click Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on a Level
3R K2 Media Server 1B is as
follows:
• SQL Server
• K2 Server
• File System Server
• File System Client
• SNMP Services
• QuickTime
If software with Yes in the Required column reports as Not Installed, you
must first install it on the K2 Media Server before continuing. Refer to
Chapter 16, Managing K2 software. After installing the software, click
Check Software . When all required software reports as Installed, click
Next .