Configuring the server - part 1 – Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 User Manual
Page 103

September 7, 2007
K2 Storage System Instruction Manual
103
Configuring the server - Part 1
Configuring the server - Part 1
1. In the K2 System Configuration application tree view, select [
K2Server1]
.
2. Click the
Configure
button.
The Configure K2 Server wizard opens.
Follow the on-screen text to configure theK2 Media Server for a Level 2R K2
Storage System, as described in the following table:
On this page…
Do this…
Define server roles
Enter the name or IP address for the K2 Media Server, as currently
configured on the machine.
Enter the name or IP address of the Ethernet switch, as currently
configured on the switch, to which the K2 Media Server is connected.
For Level 2 redundant, leave all roles selected.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on the
Level 2R K2 Media Server A
is as follows:
•
SQL Server
•
K2 Server
•
File System Server
•
File System Client
•
SNMP Services
•
QuickTime
•
If software with Yes in the Required column reports as Not Installed, you
must first install it on the K2 Media Server before continuing. Refer to
Managing K2 software. After installing the software, click
Check Software
. When all required software reports as Installed, click
Next
.