Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 674)

674 K2 Storage System Instruction Manual September 7, 2007
Chapter 16 Managing K2 software
2. If you have not already done so, connect keyboard, monitor, and mouse to the K2
Media Server.
3. Insert the Recovery CD and restart the machine.
The machine boots from the disc. The Acronis True Image program loads.
4. At the startup screen, select True Image Server (Full Version) .
The Acronis True Image program loads.
The Acronis True Image main window appears.
5. In the Acronis True Image main window, click Backup .
The Create Backup Wizard opens.
6. On the Welcome page, click Next .
The Select Backup Type page opens.
7. Select The entire disk contents or individual partition and then click Next .
The Partitions Selection page opens.
8. Select Disk 1 to select the System (C:), the Database (D:), and the Backup (E:)
partitions and then click Next .
The Backup Archive Location page opens.
9. In the tree view select CD-RW Drive (F:) and then enter the name of the image file
you are creating. Create the file name using the K2 Media Server hostname and the
date. Name the file with the .tib extension. For example, if the hostname is
K2Server1, in the File name field you would have
F:\K2Server1_20051027.tib
. Click Next .
The Backup Creation Options page opens.
10. Do not change any settings on this page. Click Next .
The Archive Comment page opens.
11. If desired, enter image comments, such as the date, time, and software versions
contained on the image you are creating. Click Next .
The “…ready to proceed…” page opens.
12. Remove the Recovery CD and insert a blank CD.
13. Verify that you are creating an image from Disk 1 and writing to the CD-RW Drive
(F:). Click Proceed .
The Operation Progress page opens and displays progress.
14. Remove and insert CDs as prompted. As you remove each burned CD make sure
you label it correctly to show the sequence of CDs.
15. When a “Backup archive creation has been successfully completed” message
appears, click OK .
16. Click Operations | Exit to exit the Acronis True Image program.
The K2 Media Server restarts automatically.
17. Remove any CD that is still in the CD drive while the K2 Media Server is shutting