Configuring the server - part 1 – Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 User Manual
Page 159

September 7, 2007
K2 Storage System Instruction Manual
159
Configuring the server - Part 1
Storage System, as described in the following table:
On this page…
Do this…
Define server roles
Enter the name or IP address for the K2 Media Server, as currently
configured on the machine.
For Level 3 server roles, leave
SNFS file system server
,
iSCSI bridge,
and
Media database server
selected.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on a Level
3 K2 Media Server 1 is as
follows:
•
SQL Server
•
K2 Server
•
File System Server
•
File System Client
•
SNMP Services
•
QuickTime
•
If software with Yes in the Required column reports as Not Installed, you
must first install it on the K2 Media Server before continuing. Refer to
Managing K2 software. After installing the software, click
Check Software
. When all required software reports as Installed, click
Next
.