beautypg.com

Configuring the server - part 2 – Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 User Manual

Page 279

background image

September 7, 2007

K2 Storage System Instruction Manual

279

Configuring the server - Part 2

The configuration file for the media file system is displayed. You can verify media
file system parameters by viewing this file. Do not edit this file. Click

Accept

.

A “…Please wait…” message box displays progress and a “…succeeded…”
message confirms the process is complete.

7. A message informs you that you must restart the K2 Media Server, however the

restart at the end of the Configure K2 Server wizard suffices, so you do not need to
restart now.

8. Close the Storage Utility.

NOTE: Do not attempt to bring the K2 Storage System online until instructed to do
so later in this chapter.

9. Continue with the next procedure.

Configuring the server - Part 2

1. Return to the Configure K2 Server page from which you launched Storage Utility

and proceed as described in the following table: