Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 228)

228 K2 Storage System Instruction Manual September 7, 2007
Chapter 5 Installing the Level 3R Storage System
Configuring the redundant server 2B
You must wait for server 2A to restart before continuing.
For Level 3 redundant, the last K2 Media Server to configure is server 2B. It is the
redundant partner to server 2A.
1. In the K2 System Configuration application tree view, select the K2 Media Server
you are configuring as server 2B.
2. Click the Configure button. The Configure K2 Server wizard opens. Follow the
on-screen text to configure the server for a Level 3R K2 Storage System, as
described in the following table. Some screens require no input from you, as they
are based on the configurations already completed on a previously configured
FTP Server Configuration
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard Click Finish . The wizard closes. The K2 Media Server restarts. Do not
proceed until restart processes are finished.
On this page… Do this…