Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 423)

September 7, 2007 K2 Storage System Instruction Manual 423
Configuring the server - Part 2
Configuring the server - Part 2
1. Return to the Configure K2 Server page from which you launched Storage Utility
and proceed as described in the following table:
On this page… Do this…
File System Server
Configuration
This page checks on the
configuration of the server in
one of its main roles as a file
system server. The server
also functions as a file
system client, which is also
checked from this page.
Click Check . When the wizard reports that the configuration is correct,
click Next .
If you get a “The V: will not be available until this device is rebooted…”
message, you can safely continue with this procedure and follow the
instructions related to this message later in the procedure.