Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 227)

September 7, 2007 K2 Storage System Instruction Manual 227
Configuring server 2A
File System Client
Configuration
This K2 Media Server does
not function as a file system
server. It does function as a
file system client, which is
validated from this page.
Click Check . When the wizard reports that the configuration check is
successful, click Next .
iSCSI Bridge Server
Configuration
This page manages the
components that bridge
between iSCSI (the GigE
media network) and the
RAID storage. You
configure network settings
on the iSCSI adapter and the
page validates that the media
RANKs are visible as iSCSI
targets.
Select Primary .
Select an iSCSI adapter and click Modify . A network configuration
dialog box opens. Enter the media network IP address and subnet mask
and click
Apply . Do the same for the other iSCSI adapter.
To verify drives, click Check then View Target Drives . You should see
all your media drives listed.
Click
Next .
On this page… Do this…