Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 478)

478 K2 Storage System Instruction Manual September 7, 2007
Chapter 10 Installing the Level 20R Storage System
iSCSI Bridge Server
Configuration
This page manages the
components that bridge
between iSCSI (the GigE
media network) and the
Fibre Channel connection to
the RAID storage. You
configure network settings
on the iSCSI adapters and
the page validates that the
Fibre Channel adapter is in
place and that the media
RANKs are visible as iSCSI
targets.
NOTE: The iSCSI
adapters on this
server must be on a
different subnet
than those on its
redundant server
partner.
Select Backup .
Select an iSCSI adapter and click Modify . A network configuration
dialog box opens. Enter the media network IP address and subnet mask
and click
Apply .
Do the same for the other iSCSI adapter.
To verify drives, click
Check then View Target Drives . You should see
all your media drives listed.
Click
Next .
Database Server
Configuration
You do not need to enter or configure anything on this page.
Click
Next .
On this page… Do this…