Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 268)

268 K2 Storage System Instruction Manual September 7, 2007
Chapter 6 Installing the Nearline Storage System
4. Follow the on-screen text to define your nearline K2 Storage System, as described
in the following table.
On this page… Do this…
Page 1
Create a name for your Nearline K2 Storage System and type it in the
Name box.
Select
Nearline .
The Server redundancy option is not selected and is disabled. This option
applies to media database redundancy. Since the Nearline system has no
media database, this setting is correct for both redundant and
non-redundant Nearline systems.
Click
Next
Page 2
Move K2 Media Servers into the Number of Devices box, as appropriate
for your system.
Move one or more Ethernet switches into the Number of Devices box. If
a switch is also part of another K2 Storage System, it is allowed to make
it part of the Nearline system as well.
The wizard does not allow you to move any clients into the Number of
Devices box. There are no K2 Media Clients or generic clients on a
Nearline system.
Click
Next .