Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 261)

September 7, 2007 K2 Storage System Instruction Manual 261
K2 configuration and NetCentral
• Control point PC device provider — This is the Windows monitoring device
provider.
• K2 Media Server device provider
• HP Gigabit Switch device provider or Cisco Gigabit Switch device provider
• K2 L3 RAID storage device provider. This device provider supports RAID
devices for Levels 10, 20, and 30.
• Grass Valley PC Monitoring software installed — This software must be installed on
the K2 configuration Control Point PC. It includes Grass Valley SNMP agents and
other WMI based components to perform process monitoring. This provides the
information for some of the SNMP trap messages that must be sent to NetCentral.
• Control Point PC monitored by NetCentral — The K2 configuration Control Point
PC should be added to the NetCentral system and fully monitored by NetCentral.
This means that its SNMP trap destination is set to send SNMP traps to the
NetCentral server PC. Whether the Control Point PC and the NetCentral server PC
are the same PC or are different PCs, you should still add the Control Point PC to
NetCentral.
Refer to the NetCentral User Guide to set up the NetCentral system. After installing
a device provider, you can find additional documentation about monitoring that type
of device on the NetCentral Help menu.