Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 221)

September 7, 2007 K2 Storage System Instruction Manual 221
Configuring the redundant server 1B
Configuring the redundant server 1B
You must wait for the primary K2 Media Server to restart before continuing. To
verify, from the control point PC open the MS-DOS command prompt and use the
“ping” command.
For Level 3 redundant, after you have configured the first K2 Media Server (server
1A) you next configure its redundant partner K2 Media Server (server 1B).
1. In the K2 System Configuration application tree view, select the K2 Media Server
you are configuring as server IB.
2. Click the Configure button. The Configure K2 Storage System Server wizard
opens. Follow the on-screen text to configure the server for a Level 3R K2 Storage
System, as described in the following table. Some screens require no input from
you, as they are based on the configurations already completed on a previously
configured K2 Media Server.
Database Server
Configuration
Enter the name or IP address of K2 Media server 1B. This is the
redundant partner of the server you are now configuring.
Click
Next .
Completing the
Configuration Wizard Click Finish . The wizard closes. The server restarts. Wait until all
startup processes have completed before continuing.
On this page… Do this…