Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 691)

September 7, 2007 K2 Storage System Instruction Manual 691
Modifying K2 Storage System settings
Modifying K2 Storage System settings
Use the procedures in this section when changing or viewing settings on an existing
K2 Storage System. These are the settings that define the K2 Storage System.
Procedures are as follows:
• “Accessing K2 Storage System features” on page 691
• “Renaming a K2 Storage System” on page 691
• “Adding devices to a K2 Storage System” on page 692
• “Removing a K2 Storage System” on page 694
• “Accessing a K2 Storage System from multiple PCs” on page 694
• “Reconnecting to a K2 Storage System” on page 695
• “Taking a K2 Storage System offline” on page 695
• “Bringing a K2 Storage System online” on page 696
• “Viewing iSCSI assignments” on page 696
Accessing K2 Storage System features
In the K2 Configuration Application, features for modifying K2 Storage System
settings are as follows:
Renaming a K2 Storage System
The requirements for renaming an existing K2 Storage System are as follows:
• You must be logged in to the K2 System Configuration application with
permissions equivalent to K2 administrator or higher.
• The devices of the K2 Storage System do not need to be offline, and there is no
restart of devices required.
To rename an existing K2 Storage System, do the following:
1. In the tree view, select the current name of the K2 Storage System, which is the top
node of the storage system tree.
2. Click Rename . The Rename dialog box opens.
3. Enter the new name of the storage system and click Apply .
Select the K2
Storage System... To make these
features available.