Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 587)

September 7, 2007 K2 Storage System Instruction Manual 587
Configuring optional NH servers
3. If you got a “The V: will not be available until this device is rebooted…” message
on the File System Server Configuration page, after the K2 Media Server restarts,
do the following:
a. In the K2 System Configuration application tree view, under the K2 Media
Server select the File System Server node.
The File System Server Configuration page appears.
b. Click Check and verify that the V: drive is shared. This is required for NAS
server functionality.
Configuring optional NH servers
If you have one or more optional NH K2 Media Servers, you next configure those
servers. This section applies to both NH1 (1 Gig FTP) servers and NH1-10GE (10 Gig
FTP) servers.
NOTE: Multiple NH servers on a K2 Storage System must be of the same type,
either all NH1 or all NH1-10GE.
FTP Server Configuration
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard Click Finish . The wizard closes. The K2 Media Server restarts. Do not
proceed until restart processes are finished.
On this page… Do this…