Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 282)

282 K2 Storage System Instruction Manual September 7, 2007
Chapter 6 Installing the Nearline Storage System
On this page… Do this…
Define server roles
Enter the name or IP address for theK2 Media Server, as currently
configured on the machine.
For Nearline server roles, selections are disabled. Leave
SNFS file
system server , FTP server , and NAS server selected.
Click Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on a
Nearline K2 Media Server is
as follows:
• K2 Server
• File System Server
• File System Client
• QuickTime
NOTE:
If software with Yes in the Required column reports as Not Installed, you
must first install it on the K2 Media Server before continuing. Refer to
Chapter 16, Managing K2 software. After installing the software, click
Check Software . When all required software reports as Installed, click
Next .