Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 User Manual
Page 642

642
K2 Storage System Instruction Manual
September 7, 2007
Chapter 13 Installing the Nearline 10 Storage System
3. If you got a “The V: will not be available until this device is rebooted…” message
on the File System Server Configuration page, after the K2 Media Server restarts,
do the following:
a. In the K2 System Configuration application tree view, under the K2 Media
Server select the File System Server node.
File System Server
Configuration
This page checks on the
configuration of the K2
Media Server in one of its
main roles as a file system
server. The K2 Media Server
also functions as a file
system client, which is also
checked from this page.
It is not necessary to bind
RANKs or create a file
system, since those tasks
were completed when you
configured the first K2
Media Server.
Click
Check
. Confirm a “… default.cfg file copied…” message. When
the wizard reports that the configuration check is successful, click
Next
.
and
Yes
to confirm copying default.cfg to the server.
If you get a “The V: will not be available until this device is rebooted…”
message, you can safely continue with this procedure and follow the
instructions related to this message later in the procedure.
FTP Server Configuration
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard
Click
Finish
. The wizard closes. The K2 Media Server restarts. Do not
proceed until restart processes are finished.
On this page…
Do this…