Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 231)

September 7, 2007 K2 Storage System Instruction Manual 231
Configuring the redundant server 2B
3. If you got a “The V: will not be available until this device is rebooted…” message
on the File System Server Configuration page, after the K2 Media Server restarts,
do the following:
a. In the K2 System Configuration application tree view, under the K2 Media
Server select the File System Server node.
SCSI Bridge Server
Configuration
This page manages the
components that bridge
between iSCSI (the GigE
media network) and the
RAID storage. You
configure network settings
on the iSCSI adapter and the
page validates that the media
RANKs are visible as iSCSI
targets.
For Level 3 redundant, select Backup .
Select an iSCSI adapter and click Modify . A network configuration
dialog box opens. Enter the media network IP address and subnet mask
and click
Apply . Do the same for the other iSCSI adapter.
Click Next .
FTP Server Configuration
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard Click Finish . The wizard closes. The K2 Media Server restarts. Do not
proceed until restart processes are finished.
On this page… Do this…