Rear panel – ATEIS IDA8 User Manual

Page 63

Text mode
Original mode

Product Features

Line B Error

Backup AMP Error

AMP Line Leakage Error

4.1.3.3

Rear Panel

Backup Amplifier Output:

This connector connects to the output of the backup amplifier for receiving the 100V audio signal
powered by the amplifier.

Bypass Mode Outputs:

This port is used to share the bypass mode microphone signals through the IDA8C-IDA8S network
(only needed when using fiber optic network).

PDC (Peripherals Device Controller) Connectors:

Two RJ-45 connectors are used to connect consoles or peripheral devices. For examples, PSS AS,
URC AS, PPM AS connect to the IDA8SAB via this connector.

Local Ateis Net Connectors:

The optional card for building a local dedicated IDA8C-IDA8S network.

Zone1 Speaker Line Output:

This connector is used to connect the loudspeaker of zone1, the below picture shows how to
connect the speaker.