ATEIS IDA8 User Manual

Page 188

ATEIS - IDA8

188

14.If the White Noise Level goes down to -40dB and the over LED is lighted up, this means the

calibration has failed at this time, and the DNM received the sound too loud, please check:

Is The sound of loudspeaker is too loud?

Is the distance too close between DNM and loudspeaker?

Is the DNM damaged ?

15.After calibration finished, DNM starts to work, It increases the level of audio if there is some noise

detected by DNM.

16.To save the parameter, click the [Save parameter] in Ateis Studio.