Urgp, Overview, Front panel – ATEIS IDA8 User Manual

Page 224

Text mode
Original mode

ATEIS - IDA8

224

4.2.7

URGP

4.2.7.1

Overview

The URGP is an extension unit for the IDA8-System, LAPG2T and ECS. Each URGP provides those
systems with 32 additional alarm inputs. Each input is monitored and can be programmed to trigger a
digital audio message into a specific zone or group of zones. The URGP is linked to the System units
through a RS232 /RS485 monitored serial link.

4.2.7.2

Front Panel

Evacuation LED:

Lights up in red when the Evacuation input is active or blinks while boot.

Following table lists the states of the Evac LED:

Status

Frequency

Activity

Continuous

One of the Evacuation inputs is active.

Blinking

Blinks 5 times after powered on.

Fault LED:

Displays fault status of system. the following table lists the states of the Fault LED: