Telephone card setting, 3rd party control, Ateis 3rd party control – ATEIS IDA8 User Manual

Page 398: Overview, Assign elements to 3rd party control, 5 3rd party control

ATEIS - IDA8

398

5.4.19 TelePhone Card Setting

This function allows the user to monitor the ethernet status.

1. Open the Device Management Window.

2. Search and Connect to the device. For step by step guide, see "

Device Management > Search and

Connect

3. Click [Ethernet Monitor] to open the Ethernet Monitor window.

Country Code: Select the Country/Area.

FSK: Here you can choose the standard for transmitting caller ID.

Password Enable: Check the checkbox to enable the password. Once it's checked, the caller
needs to enter the password for paging access.

5.5

3rd Party Control

5.5.1

Ateis 3rd Party Control

5.5.1.1

Overview

An Ateis device supplies a flexible way for controlling the parameters inside of the device. Depending on
the device, Ateis 3rd party protocol allows an external device to control an Ateis device through Ethernet
or RS232.

5.5.1.2

Assign Elements to 3rd Party Control

To make an element controllable by 3rd party protocol, you need to specify that it is able to be
controlled by 3rd party devices. To activate this setting, right click the element and click on menu [3rd
Party Control > Single]

364