ATEIS IDA8 User Manual

Page 355

System Functionality

355

On the right side of window, there is a knob to simulate the source that triggers the event. If you
adjust the knob, the value of elements also changed.

Control Type:

This option determines the type of knob simulation. There are two options of Control Type:

Value:

Knob adjust value of elements using native value.

Percent:

Knob adjust value of elements by percentage.

Element:

Indicates which element of the component is controlled by the value trigger.

Component:

Indicates which component of the device contains the previously mentioned element.

Device:

Indicates which device contains the previously mentioned component.

System:

Indicates which system contains the previously mentioned device.

Min:

Specifies the minimum value of the simulating knob.

Max:

Specifies the maximum value of the simulating knob.

Remove:

Removes the element controlled by the event.

This operation only removes the relation between the element and event and does not delete

the element.

Clear:

Removes all elements controlled by the event.