ATEIS IDA8 - Manual (Page 216)

ATEIS - IDA8 216
© 2012 ATEÏS
Assign to Design Objects
The device object in design window needs map to physical device, then the configuration of the
device can be set to the physical one. Click "Name " field of device list to select correspond device
object. Refer to topic search and settings for more detail.
4.2.4.5 Maintenance and Troubleshooting
This chapter will help you to diagnose the common problems for troubleshooting and how to solve. The
maintenance of the device and peripherals are also told here.
If none of the solution works, please contact your Ateis dealer.
The LED indicators:
When the EVAC LED lights up
When the EVAC LED lights up, it means the system is under evacuation paging.
When the FAULT LED blinks
When the FAULT LED blinks, it means the paging console lose the communication with audio
processor.
Please use the Ateis Studio to check the paging console component is added correctly, and then
store the table into the paging console.
4.2.5 URC AS
4.2.5.1 Overview
The URC AS can be fully programmed via Ateis Studio to adjust every setting you want: volume, mute,
preset, components' adjustments... URC AS connect to audio processor via RS485 cable that allow you
to remote control parameters of audio processor with a long distance. A elegant OLED to display
information of parameters or the status. It give extreme simple and effective experience of control
interface with only Two buttons [EXIT], [BACK] and a Knob to achieve whatever action desired. The URC
AS is definitely the best choose for remote controlling with low cost consideration.