ATEIS IDA8 - Manual (Page 198)

ATEIS - IDA8 198
© 2012 ATEÏS
The keypad connector on the keypad for connecting the PPM-AS. Every keypad is shipped with one
flexible flat cable on it.
Keypad connector:
The keypad connector on the keypad for connecting the next keypad, one PPM-AS can have 2
keypads for extending the keys.
4.2.3.4 Characteristics
Case:
Dimension = 105mm (W) x 190mm (L) x 50mm (H).
Weight = 0.7Kg.
Color = RAL7035.
Goose-neck length with microphone = 300 mm
Power:
Item Voltage Current Consumption Comment
DC Input 18V~26V, Typical 24V 120mA -
Microphone Output:
Maximum level = 6dBu.
Output Impedance = 100Ohm.
THD @ 1kHz < 1%.
Bandwidth @ -3dB = 100Hz ~ 18kHz.
Front Panel Speaker:
Impedance = 4Ohm.
Maximum Power @ 1kHz = 1W.
THD @ 1kHz < 1%.
Bandwidth @ -3dB = 200Hz ~ 8kHz.
Cable length:
100m(control and power on the same cable)
900m(when power line connects to junction box).
Comes standard with Junction box (JB) and CAT5 cable (1.5)
4.2.3.5 Configuration
To make PPM AS work, it needs to edit configuration using Ateis Studio. Following sections are about
configuration editing.
The example here is IDA8, the configuration is the same for ESC, LAPG2T and other Ateis Audio
Processor.