ATEIS IDA8 User Manual

Page 174

ATEIS - IDA8

174

There are two connectors of this output:

PRI: Connect to Power Supply PRI connector next RU-MAIN/PDC/CTL.

SEC: Connect to Power Supply SEC connector next RU-MAIN/PDC/CTL.

Power Supply:

24V DC power input, which is connect to 24V DC Output of IDA8C/S.

There are two connectors of this input:

PRI: 24V DC power input from primary audio processor.

SEC: 24V DC power input from secondary audio processor.

Speaker Zone Output:

There are 8 zones for speaker connection. each zone consists of following connectors(from left to
right):

P_LINEA: Connect to speaker zone output line A of primary audio processor.

P_LINEB: Connect to speaker zone output line B of primary audio processor.

LINE A: Connect to line A speaker.

LINE B: Connect ot line B speaker.

S_LINE A: Connect to speaker zone output line A of secondary audio processor.

S_LINE B: Connect to speaker zone output line B of secondary audio processor.

Zone Amplifier Output:

There are 8 zones for amplifier output connection, it receive the gained audio signal coming from
normal amplifier, each amplifier output consist of three connectors:

P_AMPO: Connect to normal amplifier output connector of primary audio processor.

AMPO: Connect to output of normal amplifiers.

S_AMPO: Connect to normal amplifier output connector of secondary audio processor.

Backup Amplifier Output:

There are two backup amplifier outputs on RU-MAIN, each output consist of three connectors:

P_AMPO: Connect to backup amplifier output of primary audio processor.

AMPO: Connect to backup amplifier output.

S_AMPO: Connect to backup amplifier output of secondary audio processor.

Backup Amplifier Input:

There are two backupt amplifier inputs on RU-MAIN, each input consist of three connectors, where N
is the number of channel:

P_BKP N: Connect to backup amplifier input of primary audio processor.

BKP N: Connect to input of backup amplifier.