Rear panel – ATEIS IDA8 User Manual

Page 35

Product Features

Line A Error

Line B Error

Backup AMP Error

AMP Line Leakage Error

EVAC Reset Button:

Cancels the event triggered by EVAC button.

Power LED:

This LED lights up when IDA8C is power on.

Network LED:

Show the status of Ateis Net. This LED lights up if more than two deployed IDA8 devices in Ateis
Net.

EVAC Button:

To trigger an event bind with this button.

4.1.1.3

Rear Panel

Speaker Zone Outputs:

There are 8 zones for speaker & amplifier connections. Each zone consists of following connectors
(from left to right):

connector of line A speaker

connector of line B speaker

connector of 100V audio coming from amplifier

The IDA8 output is exactly the same audio signal to line A and B. Two speakers can connect to one
zone for redundancy purposes, one connects to line A, another connects to line B. Both speaker
lines are monitored. That means if damage to a speaker is detected, a global fault "Line A/B Error"
will be generated.

Backup Amplifier I/Os: