ATEIS IDA8 - Manual (Page 358)

ATEIS - IDA8 358
© 2012 ATEÏS
State Pages
There is a page for each state in the step trigger event. To switch states, click the tab of the
desired state.
Element
Indicates which element of the component is controlled by the value trigger.
Component
Indicates which component of the device contains the previously mentioned element.
Device
Indicates which device contains the previously mentioned component.
System
Indicates which system contains the previously mentioned device.
Step Value
Specifies the step value of the state.
Modify
Enables or disables the selected element controlled by the state of event.
Remove
Removes the element controlled by the event.
This operation only removes the relation between the element and event and does not delete
the element.
5.3.5 Step Control Event
Description
This event is used to control the element value. It adjusts the value of the element by step when the
source triggers the event. The source which triggers the event sends the step value to the event for
adjusting elements.
Event Creation