Ethernet monitor – ATEIS IDA8 User Manual

Page 397

System Functionality

397

Evac Input Control Channel: The channel which is connected to the Redundancy Units.

Device List: Shows how many units in the secondary system and their Serial Numbers.

4. Once the setting is done, press the "Configure" button and you can see the Redundancy information

shows at the Device Information column as shown in the picture below. The two system becoming
each other's backup System.

5.4.18 Ethernet Monitor

This function allows the user to monitor the ethernet status.

1. Open the Device Management Window.

2. Search and Connect to the device. For step by step guide, see "

3. Click [Ethernet Monitor] to open the Ethernet Monitor window.

4. Once enable the Ethernet Monitor, the fault message will show in the log list when the communication

is broken.

364