ATEIS IDA8 User Manual

Page 51

Product Features

1K tone: Press to check the 1K tone.

Reset Monitor: Stop monitoring.

Data/Time:

Here you can set the current time, changes in this area would affect the schedulers.

Auto Logout:

Set the auto logout time, the unit is minute.

Ethernet:

Here you can set IDA8C's IP Address, Subnet and Gateway.

Brightness:

Here you can set the touch screen's brightness.

Menu Hold Time:

It will display the following pages after the menu hold time.

The priority of the displaying: EVAC (If during paging) > Fault List (If any faults are detected) > IDA8
Logo.

Warning Tone Level:

Here you can set the warning tone's level.

Audio Board Monitoring:

Here you can detect the wiring problem with the audio sources.