Maintenance and troubleshooting – ATEIS IDA8 User Manual

Page 235

Product Features

235

THD @ 1kHz < 1%.

Bandwidth @ -3dB = 200Hz ~ 20kHz.

Front Panel Speaker

Impedance = 8Ohm.

Maximum Power @ 1kHz = 1W.

THD @ 1kHz < 1%.

Bandwidth @ -3dB = 200Hz ~ 8kHz.

Cable length

100m(control and power on the same cable)

900m(when power line connects to junction box).

Comes standard with Junction box (JB) and CAT5 cable (1.5)

4.2.9.4

Maintenance and Troubleshooting

This chapter will help you to diagnose the common problems for troubleshooting and how to solve. The
maintenance of the device and peripherals are also told here.

If none of the solution works, please contact your Ateis dealer.

The LED indicators:

When the EVAC LED blinks

When the EVAC LED blinks, it possibly is the plug-in problem.

Please read

this.

When the FAULT LED blinks

When the FAULT LED blinks, it means the paging console lose the communication with audio
processor.

Please use the Ateis Studio to check the paging console component is added correctly, and then
store the table into the paging console.

372