Contact i/o, Evacuation input – ATEIS IDA8 User Manual

Page 148

Text mode
Original mode

ATEIS - IDA8

148

Bypass mode input contact:

Connect the pin CMD and pin GND of the bypass-mode input to a button. This input contact can
trigger Bypass Mode Paging.

Cascade:

If the application uses multiple IDA8s and uses fiber optic as Ateis Net is transmitting media,
additional wiring for Bypass Mode Paging cascade must be used. See the picture below:

4.1.10 Contact I/O

4.1.10.1 Evacuation Input

IDA8 Devices have evacuation inputs that allow the monitoring of external contacts. To configure
evacuation inputs, perform the following:

Assign an element to an evacuation input control: