ATEIS IDA8 User Manual

Page 255

Product Features

255

Status

Frequency

Activity

Permanent

There are faults in audio processor.

Blinking

Lost communication with audio processor.

4. EVAC Indicator

Light up when the system is under evacuation paging.

Status

Frequency

Activity

Permanent

System is under evacuation paging.

Blinking

PCP does not do a "Plug-in" in Ateis Studio before using.

5. Power Indicator

This LED light up when the PCP is powered on.

6. Microphone Connector

A phone jack connector for connection of telephone styled microphone.

7. Talk Button

Press this button to request paging. There are two modes for this button: push to talk and lock.

8. Talk Indicator

This LED light up if PCP is allowed to paging, on the other word, the paging request has been
acknowledged.

Note: Sometimes even the paging request is granted, zones under paging still can be occupied by
other sources with higher priority. In the event of, the talk LED still lights up, you can check it from
busy LEDs.

9. Hold Indicator(1~8)

These LEDs Indicate which keys are selected.

10.All Call/Release Button

This button is used to select or deselect all keys.

11.All Call/Release Indicator

This indicator lights up if all keys are selected.

12.Event Select Key(1~8)

These buttons are used to select keys, each key may link to an event for triggering actions like
paging or adjust the value of parameters.

13.Busy Indicator(9~16)

Please refer to Busy Indicator(1~8).

14.Hold Indicator(9~16)

Please refer to Hold Indicator(1~8).

15.Event Select Key(9~16)

Please refer to Event Select Key(9~16).