Front panel, Characteristics, Ru-ctl – ATEIS IDA8 User Manual

Page 176: Overview

Text mode
Original mode

ATEIS - IDA8

176

4.2.1.5.2 Front Panel

Secondary Active Indicator:

This LED light up if active system is primary audio processor.

Primary Active Indicator:

This LED light up if active system is secondary audio processor.

Fault Indicator:

This LED light up if the unit is set to be slave, and a short or open is detected on S. WD(Secondary
Watching Dog) port.

Note: If this indicator light up, it means there is an error of the unit, user needs to check wiring of S.
WD connector or replace by a good unit.

Power Indicator:

This LED light up if this unit is power on.

4.2.1.5.3 Characteristics

Dimension = 436mm x 150mm x 44mm.

power consumption : 350mA @24Vdc

4.2.1.6

RU-CTL

4.2.1.6.1 Overview