ATEIS IDA8 - Manual (Page 199)

Product Features 199
© 2012 ATEÏS
Create PPM AS Object
Open or create a Ateis studio configuration file, in the [Device] design window, create audio
processor and PPM AS object:
1. Drag IDA8C to design window to create audio processor object.
2. Drag PPM AS to design window to create PPM AS object.
3. Wiring to connect green pins between PPM AS object and audio processor.
DSP component configuration
It need to route audio from PPM AS to paging component for paging processing. See the following
example: