Fireman microphone, Overview, Characteristics – ATEIS IDA8 User Manual

Page 240: Configuration

ATEIS - IDA8

240

Please use the Ateis Studio to check the paging console component is added correctly, and then
store the table into the paging console.

4.2.11 Fireman Microphone

4.2.11.1 Overview

The Fireman Microphone SHM 1 is a small compact microphone dedicated to security calling. It is a
totally monitored microphone with internal resistor network to detect four different states (Shortcut,
Closed Contact, Open Contact, Absent). Firemen Microphone SHM 1 for All call, group or zone calls.

4.2.11.2 Characteristics

Case

Dimension = 62mm (W) x 45mm (L) x 102mm (H).

Weight = 0.15KG

Cable = 1.8M(

spring cord

)

Microphone

Bandwidth @ -3dB = 300Hz ~ 6kHz.

Impedance = 500ohm.

Sensitivity = -72dB

4.2.11.3 Configuration

Fireman microphone needs config using Ateis Studio before working. Fireman is the DSP component for
the microphone. Most of time Fireman component is working with Network Paging component, in such
settings, fireman microphone is able to paging.