Normal amp out of toler, Backup amp out of toler – ATEIS IDA8 User Manual
Page 127
Product Features
127
© 2012 ATEÏS
4.1.7.1.28 Normal AMP Out of Toler
Fault Meaning:
The reference value measured from the normal amplifier is out of tolerance.
Fault Indication:
LED Indicator:
When this error is detected, the following LEDs will light up:
o
G. Fault LED on the front panel of the IDA8C/S.
Log:
Text messages display at the touch screen of the IDA8C:
"Normal AMP Out of Toler"
"Zone n Normal AMP Gain Too High"
"Zone n Normal AMP Gain Too Low " (Where n = 1~8)
Text messages display at the window [Machine Fault Record] in Ateis Studio:
A buzzing sound outputs to the monitoring speaker on the front panel of the IDA8C.
Fault Handling:
Check the measured value of the normal amplifier.
4.1.7.1.29 Backup AMP Out of Toler
Fault Meaning:
The reference value measured from the backup amplifier is out of tolerance.
Fault Indication:
LED Indicator:
When this error is detected, the following LEDs will light up:
o
G. Fault LED on the front panel of the IDA8C/S.
Log:
Text messages display at the touch screen of the IDA8C:
"Backup AMP Out of Toler."
"Zone n Backup AMP Gain Too High"