ATEIS IDA8 - Manual (Page 570)

ATEIS - IDA8 570
© 2012 ATEÏS
This LED lights up if the signal of the input channel is greater than the Overload Thd.
Volume:
The VU-Meter shows the channel RMS level.
Signal:
Indicates if an audio signal presents above -30 dB from the chosen 'Sensitivity'.
Level:
The signal output level of the channel.
Overload Thd.:
A threshold value to determine if the signal of a channel is overloaded.
6.21.2 RS485 Output
Component Template:
Component Appearance:
Description:
This component controls and monitors the RS485 output signal parameters. The output component
represents the physical analog inputs accessible on the RS485 port of the Audio Processor. There
are four ports (A to D) which represent different channels of the RS485 port. Some consoles like
PSS AS which transfers audio signals via PDC port is the RS485 interface. To outputs an audio
signal via RS485 port, you need to create a RS485 output component in the design window.
Control Window: