Device maintenance, Update firmware – ATEIS IDA8 User Manual

Page 281

Text mode
Original mode

Product Features

281

After power up, you'll the a message on the top of LCD screen: "No Preset". It means the URC200 TPC
now is forbidden to run the configuration. And then you can save another configuration for the device to
make it working.

4.2.15.5 Device Maintenance

This topic contains the knowledge about the update procedure and inner settings of devices. For
example the IP settings.

4.2.15.5.1 Update Firmware

Please follow the steps below to update the firmware of URC200TPC:

1. Lunch software and search URC200TPC. Click page [Network]. Set the network interface card that

communicate with URC200TPC. After the network interface card is selected, the IP address is
refreshed automatically.