ATEIS IDA8 - Manual (Page 486)

ATEIS - IDA8 486
© 2012 ATEÏS
Description:
This component controls the input signal's parameters and monitors it. The analog input modules
represent the physical analog inputs which are accessible on the rear panel of the Audio Processor.
There are several separate modules for use with each of the audio board slots. Analog input and
output modules are added automatically to the DSP window of the relevant processor by defining
their module configuration at the time you create them and should not be altered.
Control Window:
Element Properties:
Name Initial Minimum Maximum Precision Unit
Bypass Off - - - -
Mute Off - - - -
Sensitivity 0dB - - - -
Phantom Power Off - - - -
RTO Off - - - -
Overload Off - - - -
Volume -50.0 -50.0 20.0 - dB
Signal Off - - - -
Level 0 -60.0 20.0 0.1 dB