ATEIS IDA8 - Manual (Page 256)

ATEIS - IDA8 256
© 2012 ATEÏS
4.2.13.3 Characteristics
Case
Dimension = 346 mm (W) x 220 mm (H) x 128 mm (D).
Weight = 3 Kg.
Color = RAL7035.
Power
Item Voltage Current Consumption Comment
DC Input 18V~26V, Typical 24V 150mA -
Handset Microphone Output
Maximum level = 6dBu.
Output Impedance = 100Ohm.
THD @ 1kHz < 0.1%.
Bandwidth @ -3dB = 200Hz ~ 20kHz.
Front Panel Speaker
Impedance = 8Ohm.
Maximum Power @ 1kHz = 1W.
THD @ 1kHz < 1%.
Bandwidth @ -3dB = 200Hz ~ 20kHz.
Cable length
100m(control and power on the same cable)
900m(when power line connects to junction box).
Comes standard with Junction box (JB) and CAT5 cable (1.5)
4.2.13.4 Configuration
To make PCP work it need to edit configuration using Ateis Studio. Following sections are about
configuration editing.
The example here is IDA8, the configuration is the same for ESC, LAPG2T and other Ateis Audio
Processor.
Create PCP Object
Open or create a Ateis studio configuration file, in the [Device] design window, create audio
processor and PCP object:
1. Drag IDA8C to design window to create audio processor object.
2. Drag PPM AS to design window to create PCP object. Note: PPM AS, PCP, PSC and CDPM
share the same object.
3. Wiring to connect green pins between PCP object and audio processor.